Burger's 2nd ed ship sheets \o/
- Thread starter Burger
- Start date
Some people may have noticed (or not 
) that I have changed web hosts. The domain name http://burger.sentientrabbits.com will still work, but the actual hosting has changed from WebNG to http://www.ibisfightclub.co.uk.
Unfortunately saved fleets will have gone because the cookies are attached to the old site. If you want to retrieve them then you can access the old site http://www4.webng.com/chburger, load the fleet, save it "manually" by copying the string and paste it into the new site.
Other than that it shouldn't really affect you much, except no ads and better reliability
The old WebNG site will remain for a little while, then be shut down. If you use this name, please change to burger.sentientrabbits.com.
) that I have changed web hosts. The domain name http://burger.sentientrabbits.com will still work, but the actual hosting has changed from WebNG to http://www.ibisfightclub.co.uk.Unfortunately saved fleets will have gone because the cookies are attached to the old site. If you want to retrieve them then you can access the old site http://www4.webng.com/chburger, load the fleet, save it "manually" by copying the string and paste it into the new site.
Other than that it shouldn't really affect you much, except no ads and better reliability
The old WebNG site will remain for a little while, then be shut down. If you use this name, please change to burger.sentientrabbits.com.
lastbesthope
Mongoose
Looks like the link in your sig goes to the old site Burger, you might want to change that.
LBH
LBH
And thanks to Burger for hosting it along with the rest of the paper fleet. 
There are top and bottom parts for the upper, mid and lower sections, plus two parts for each of the tail vanes. The top lower section should be folded in half, printed side outwards, then each of the wings folded out so that they will fit onto the bottom lower section; this provides the structure between the mid and lower sections. The wings of the mid section are a bit longer than those on the lower section because they need to curve down.
And when you've finished, it looks like this.
There are top and bottom parts for the upper, mid and lower sections, plus two parts for each of the tail vanes. The top lower section should be folded in half, printed side outwards, then each of the wings folded out so that they will fit onto the bottom lower section; this provides the structure between the mid and lower sections. The wings of the mid section are a bit longer than those on the lower section because they need to curve down.
And when you've finished, it looks like this.
lastbesthope
Mongoose
Burger said:White Star is added to the 3-D counters section, thanks to AdrianH for making it
Oooh, interesting.
LBH
nekomata fuyu
Mongoose
Why am I getting visions of LBH with a pile of printed but never to be cut out and built White Stars? :wink:
l33tpenguin
Mongoose
holy freaking crap! That is an awesome little paper counter!!!
Not to mention printed in b/w
neko said:
Not to mention printed in b/w
lastbesthope
Mongoose
Why B&W, I always print colour for games and tournaments.
Ah, I see, because B&W is the printer equivalent of unpainted.
LBH
Ah, I see, because B&W is the printer equivalent of unpainted.
LBH
Foxmeister
Mongoose
lastbesthope said:
Technically, shouldn't it really be just piles of blank paper waiting to be printed on?
Regards,
Dave
nekomata fuyu
Mongoose
And the counters in the print queue, forever waiting for LBH waiting to turn the printer on.
lastbesthope
Mongoose
I thought that about the blank paper after I'd typed the last one.
And I have several printers, all of hich could never be turned on :lol:
LBH
And I have several printers, all of hich could never be turned on :lol:
LBH
l33tpenguin
Mongoose
So... what are we going to do for a running gag when, after hell freezes over, LBH shows up at a tourny or posts pics with a fully assembled and painted fleet? 
nekomata fuyu
Mongoose
Are there any tournies being held on April Fools day? <.<;;
Similar threads
