combatdroid113
Mongoose
ok while cleanning off flash on my dilgar fleet i found rubber deeply inbedded in the flash. This is a bad sign no?
Bit worried bout the molds
- Thread starter combatdroid113
- Start date
ShadowScout
Mongoose
It means they will soon have to replace the production molds. Happens all the time... well, occasionally. As long as the master molds are kept safe it is not a bad sign for the future...
And if you get a mini that is suffering too badly from faulty molds (you know, lumps of metal where there should be none, and/or parts that didn't fill completely, or pieces of rubber embedded not in the flash, but in the miniature itself), just talk to the people at mongoose - I'm sure they will replace it with a acceptable one (at least that's SOP - if the product you buy is not up to standard, it's the sellers/producers job to give you a good one). As long as it's just flash though... a sharp hobby knife will take care of it.
And if you get a mini that is suffering too badly from faulty molds (you know, lumps of metal where there should be none, and/or parts that didn't fill completely, or pieces of rubber embedded not in the flash, but in the miniature itself), just talk to the people at mongoose - I'm sure they will replace it with a acceptable one (at least that's SOP - if the product you buy is not up to standard, it's the sellers/producers job to give you a good one). As long as it's just flash though... a sharp hobby knife will take care of it.
