Excel Ship Designer v2026.01.22

[Fluffy Bunny Feet]

You do realize I have go back and fix a TON of ships now! Sigh. And they are some of my favorite ships.
It's going to be version 1.7 of the core rulebook ships after I finally had it all sorted out. At least it's only v1.1 for High Guard, but that has 5 times the 100 tonners in it.

I had already made the 100 ton ship 6 ton bridge MTU standard BEFORE the updated CRB and it stays. I've also raised the 10 ton bridge range to be from 101 ton to 500 ton ships.

Personally I'm considering making the non starship bridges the same as small bridges for that tonnage of ships but without the penalty.

 

[Condottiere]

Since it's not two percent of hull volume, tonnage matters less than cost.

 

[shirgall]

 

[shirgall]

Frankly I would house rule this to require an additional 4T for a Jump-capable ship's bridge at 100-199T.

 

[Arkathan]

Frankly I would house rule this to require an additional 4T for a Jump-capable ship's bridge at 100-199T.

Since removing it would risk breaking something, what will probably happen is that the drop down will default to the rules HG ships were built with, and the dropdown box selecting it will move to the hidden columns. Most people know that the password is Password, and they can unlock and unhide that area to change it on the few edge cases that it would apply to.
Effectively, the sheet will operate RAW, but you can unlock the typo if you really want to.