Soo.... Airlock freebies

I would have to assume the extra cost (compared to cargo space) of airlocks is all the connections, docking clamps, rapid pressurisation and depressurisation equipment, EVA equipment, decontamination, emergency closure, plus the communications and security elements necessary. It is the ships "front door" and just as your house front door probably has more "functions" than the back door or maybe the equally sturdy internal garage door to your house, so does the primary air-lock. The comms equates to the "door bell", the doormat equates to the decontamination equipment etc. The area of my house backdoor is full of stuff that hasn't quite made the transition from internal to external storage. The front door area is pretty well clear of all but "EVA equipment" (coats, hats etc.)

As pointed out previously you can fit as many pressure bulkheads as you want at no cost or Dtonnage. Two such bulkheads in a row constitute an "airlock" from purely an air management standpoint. The pressure management aspect is not particularly significant (1 atmosphere is not that high a bar - see what I did there!). I tend to assume you can pump air in and out of bulkhead protected compartments (but possibly not as rapidly as you could with a proper airlock), but it may be that you can just contain any air that is already in there (and the valves automatically shut off if a sudden pressure drop is detected) and manually repressurise when the situation is resolved.

What those internal bulkheads probably don't have is all the other functions. From an ergonomic standpoint for example a formal airlock will probably be easier to keep uncluttered than other areas, as maintaining that level of discipline* throughout the ship is difficult. If every compartment between bulkheads is an "airlock" then every loose item in them needs to be locked down against violent decompression. A pencil propelled by the gale force wind of decompression becomes a deadly projectile. You may be able to enforce that level of lockdown if the compartment is not accessed for the voyage, but as soon as any equipment there is needed you risk loose articles. Similarly the bulkhead door between cargo compartment and the rest of the ship probably does not have full decontamination equipment, the external cargo airlock probably does.

Any bay is also a "free" airlock - or in reality a more expensive one since it has extra facilities.

Airlocks cost exactly the same per DTon as common space. It would be nice to know how much internal volume a 2 Dton airlock has, but as internal walls etc. don't take up tonnage elsewhere you could as easily argue that the 2 Dtons is the internal capacity as well. Re-imagining every common space as an airlock of the same dimensions then becomes trivial.

Just don't expect to fill it up with crap without consequence.

*Even military inspections are generally preceded by a flurry of activity to resolve all the things that should have been in place already, but higher priority activity meant things got untidy - though hopefully not "cat lady" untidy.
 
Last edited:
A flexible pressure tent kept rigid by a collapsible frame, the portable airlock has two openings and can be attached to a bulkhead to create an emergency airlock. It is most commonly used when cutting into a starship hull for rescue purposes, preserving the environment inside, but can be also used to seal a building against NBC conditions. The airlock is big enough for two vacc suited people to use at once and is reasonably robust. It comes with a small rechargeable air bottle to initially inflate it but then relies on pressure from the area being cut into to remain inflated.
 
I think airlocks should just be made free across the board. As others have mentioned, all airlocks (or docking spaces) are, is two doors with a space in between. Deck plans are the only time you really need to show them, so i say leave them as ambiguous as you want.
I checked adventure CT-0 (The imperial Fringe), and for the type S used in the adventure, they list 7 access points to the ship, not including the landing pylons (which also take up no design space). The deck plan however, does not show a dedicated air lock like the mongoose plan does.
 
Untrue. If they are updating the build rules in Core, which is now more recent than High Guard, then that rule trumps the older rule in High Guard. For an example of that, see the kerfuffle over bridge sizes changing for 100-ton ships.
But mogoosematt even confirmed that the bridge sizes did not change and that it was a misprint
 
I think airlocks should just be made free across the board. As others have mentioned, all airlocks (or docking spaces) are, is two doors with a space in between. Deck plans are the only time you really need to show them, so i say leave them as ambiguous as you want.
I checked adventure CT-0 (The imperial Fringe), and for the type S used in the adventure, they list 7 access points to the ship, not including the landing pylons (which also take up no design space). The deck plan however, does not show a dedicated air lock like the mongoose plan does.
Most of those access points are not suitable for use in exiting the ship in vaccuum or hostile atmosphere and do not count as airlocks.

You can put as many hatches as you want on your hull. They don't take up meaningful space. Airlocks, however, mean specifically an exit that is a double door area that prevents the ship's atmosphere from being affected by the exterior atmosphere (or lack thereof).

I would expect that the Type S has one airlock so you can EVA without evacuating the ship to vacuum, but it's entirely possible to design a ship that has no intention of ever opening a door in an unsafe exterior atmosphere.

Is it worth tracking whether there is an airlock or not? Probably not, as long as no one is being ridiculous about it. But the level of abstraction in ship design is always going to be a flavor to taste thing.
 
Most of those access points are not suitable for use in exiting the ship in vaccuum or hostile atmosphere and do not count as airlocks.

You can put as many hatches as you want on your hull. They don't take up meaningful space. Airlocks, however, mean specifically an exit that is a double door area that prevents the ship's atmosphere from being affected by the exterior atmosphere (or lack thereof).

I would expect that the Type S has one airlock so you can EVA without evacuating the ship to vacuum, but it's entirely possible to design a ship that has no intention of ever opening a door in an unsafe exterior atmosphere.

Is it worth tracking whether there is an airlock or not? Probably not, as long as no one is being ridiculous about it. But the level of abstraction in ship design is always going to be a flavor to taste thing.
Ah, I think that's the magical distinction there. An airlock would not be the same as a hatch. Airlocks would/should include all the bells and whistles that one would expect. Whereas a hatch is just meant to let you in/out between vacuum and the pressurized inside of the ship.

If you remember the scene in SW, where Lando went through a hatch to get to the upper hull of the Millenium Falcon, it was a basic two-staged access point. The Falcon had prominent port and starboard airlocks. Other ships in sci-fi have had the same. In ST: The motion picture there was the access hatch that Spock left. However the main airlocks for docking were in different locations. No reason for Traveller ships to really be much different.

Keeping the distinction would allow you keep the rule as written, and still let people install a 'cheap' hatch wherever you wanted.

If I recall one of the covers of CT/MT era supplement, it had the scout ship with what appeared to be a hatch in the rear engine room. An odd place to put one, but I suppose it could be handy.
 
If you remember the scene in SW, where Lando went through a hatch to get to the upper hull of the Millenium Falcon, it was a basic two-staged access point.
(ObThatGuy: tESB)

Plus it had the type of iris valve that can actually be airtight!

(At least if you've got a gasket design that will hold up.)
 
Cargo and vehicle bays are usually functional airlocks. The Type S basically has one regular airlock and the Air/Raft bay (some deckplans may have the small cargo bay as another).
 
Cargo and vehicle bays are usually functional airlocks. The Type S basically has one regular airlock and the Air/Raft bay (some deckplans may have the small cargo bay as another).
The T5 floorplan and the 2nd Dynasty 3d-printed model based on it are the best for illustrating this. The true airlock has has the lockers and crash seats and the garage just has two pressure doors... but there's other pressure doors in the ship that allow breaking it up into bulkhead-protected zones, and getting ingress/egress, but they are not airlocks.
 

Attachments

  • 20251208_095122.jpg
    20251208_095122.jpg
    1.7 MB · Views: 6
  • 20251208_095131.jpg
    20251208_095131.jpg
    1.5 MB · Views: 5
  • 20251208_095151.jpg
    20251208_095151.jpg
    1.6 MB · Views: 6
  • 20251208_095434.jpg
    20251208_095434.jpg
    1.5 MB · Views: 6
  • 20251208_154333.jpg
    20251208_154333.jpg
    1.7 MB · Views: 6
Back
Top