(1) There is only a single pilot station shown on the drawing. The templates would be better served to have a universal one station/two station bridge, since small craft have the same control space requirements. The ones for the launch or whatever that craft is on the lab ship look far better.
(2) The module appears to be at least 38Dtons on the illustration.
(3) Since the cutter sometimes is module-less, it would make more sense to swap the position of the cargo and storage area to the forward section, allowing crew access to it while the module is not present.
(4) I do like that example modules are illustrated. More detailed art work would be very nice here, since the cutter swaps in various modules.
(2) The module appears to be at least 38Dtons on the illustration.
(3) Since the cutter sometimes is module-less, it would make more sense to swap the position of the cargo and storage area to the forward section, allowing crew access to it while the module is not present.
(4) I do like that example modules are illustrated. More detailed art work would be very nice here, since the cutter swaps in various modules.